Toners, OPC Drum, Doctor Blade and More Also Released
Sanford, N.C. – (September 25, 2014) – Static Control has released more than 50 replacement chips for a wide variety of cartridges across multiple OEMs in the last two weeks, along with toners, an OPC drum, doctor blade and convenient conversion end plates for use in HP® M177 cartridges.
More than 40 replacement chips for use in Kyocera® cartridges for multiple printers, regions and yields were released, adding upon Static Control’s comprehensive offering for Kyocera® printers. Contact a Static Control sales representative for a full list of chip offerings. Also released were a large number of replacement chips for use in Olivetti® cartridges for multiple printers and yields.
Replacement chips were launched for use in Xerox® Phaser® 6700 cartridges in Latin America, Middle East/Africa and India. Three chips were launched for cartridges used in the Ricoh® SP 3410/3510 and 3400 series of printers. A Latin America regional chip was released for Okidata® C910 cartridges. A regional replacement chip for use in HP® 960XL was also launched for India, which features Static Control’s patented ink gauge technology.
Also launched this week were Odyssey® color toners for use in Samsung® CLT-x609S cartridges, which offers remanufacturers rich color saturation and performance similar to the OEM. This toner was developed to overcome fusing issues seen with other aftermarket offerings.
Now available is universal toner for use in Kyocera® TK-59x, TK-56X and TK-58x cartridges, which was specifically formulated and manufactured to match the OEM. This is important because toner from the previous cartridge mixes with the toner from the next cartridge in the imaging unit. Non-compatible toner can create excessive backgrounding during the mixing period.
An Odyssey® OPC drum was released for use in cartridges for Okidata® C9600. This replacement drum, when paired with Static Control’s OKIUNIV toner, provides OEM-comparable performance over the life of the cartridge.
A replacement doctor blade for use in cartridges for Dell® 5330 printers was also released. This stainless steel doctor blade is more durable than other aftermarket offerings, and provides better overall image quality lasting for the cartridge life cycle.
Also released were conversion end plates for use in HP® M177 cartridges, which allow cartridges from the HP® CP1025 family (126A) to be used in the newer HP® M177 family of printers through a quick and easy conversion process.
Static Control currently has more than 1,000 products in development. People interested in hearing about the latest products should contact a sales representative to be added to Static Control’s New Product Release email which is sent out with each new release.
About Static Control
Static Control is the largest manufacturer of aftermarket imaging systems and components supporting genuine cartridge remanufacturers within the global laser and ink jet industry. Sales and distribution facilities are located worldwide. Research, development, engineering and manufacturing as well as global distribution are located at Static Control’s world headquarters in Sanford, North Carolina, USA. Static Control manufactures in-house more than 10,000 imaging products and offers a product catalog of more than 14,000 imaging products to the aftermarket industry.
